12mm MAGNUM PE-RT Pipe
12mm MAGNUM PE-RT Pipe
Couldn't load pickup availability
Properties
Properties
Maintenance
Maintenance
This 12mm MAGNUM PE-RT underfloor heating pipe is suitable for water-based underfloor heating systems. The 12mm pipe is available in 100-meter or 300-meter lengths. It is suitable for high temperatures up to 80°C.
- Length: 100 meters
- Diameter: 12 millimeter
- Wall thickness: 1.5 millimeters
- KOMO and SKZ approved
- Oxygen diffusion-tight according to DIN 4726
MAGNUM PE-RT pipe
The MAGNUM PE-RT pipe is made of PE-RT type I, which stands for Polyethylene Raised Temperature. This makes it suitable for high temperatures up to 80°C with short peak loads of up to 95°C. The material is strong and flexible. The heating pipes are also recyclable. The pipe is specially designed for hot and cold water systems, underfloor and wall heating/cooling, and ceiling heating. Furthermore, the heating pipe is KOMO and SKZ certified and oxygen-tight according to DIN 4726.
Construction of the 12mm x 1.5mm MAGNUM PE-RT heating pipe
- Level 1 PE-RT – Type 1
- Layer 2 Inner adhesive layer
- Layer 3 Diffusion-tight EVOH layer
- Layer 4 Outer adhesive layer
- Level 5 PE-RT – Type 1
Maximum tube length
This 12-millimeter- diameter PE-RT pipe has a 1.5- millimeter wall thickness. The pipes are available in rolls of 100 meters and 300 meters . Please note that the maximum pipe length per heating circuit is 100 meters. Longer pipe lengths result in excessive pressure loss. It is possible to connect two pipes to a circuit using "Push-Fit" splitters .
Mounting systems
This 12mm MAGNUM PE-RT pipe can be used with various mounting systems. Several mounting systems are explained below.
SlimFit system
The SlimFit system is the thinnest and lowest system available. It uses plastic tiles that easily click together. The 12-millimeter heating pipe then clicks into the tiles. Thanks to the open structure, a good bond is created between the leveling compound and the subfloor. This system can also be used for heating and/or cooling in walls. The total height is only 15 millimeters.
HeatBoard W system
The HeatBoard W system consists of profiled EPS insulation boards with a height of 18 millimeters. The boards have recesses for the heating pipes. It is a very lightweight system with a low installation height. This makes it often used in situations where installation over existing flooring is preferred. The HeatBoard W system is suitable for installation under floating wood, parquet, or laminate floors.
Shrink nets
You can also use shrink nets . Heating pipes can be easily secured to the shrink net with tie wraps or quick-release fasteners . After installing the shrink nets with underfloor heating, you finish the floor with a (cement) screed. This method is therefore often used in new construction and renovations.
Warranty
We offer a full 50-year manufacturer's warranty on this 12mm MAGNUM PE-RT pipe, including coverage for the first 10 years against consequential damage.
