20mm MAGNUM PE-RT Pipe

MAGNUM PE-RT pipe

The 20mm MAGNUM PE-RT pipe is made of PE-RT type I, which stands for Polyethylene Raised Temperature. This makes it suitable for high temperatures up to 80°C with short peak loads of up to 95°C. The material is strong and flexible. The heating pipes are also recyclable. The pipe is specially designed for hot and cold water systems, underfloor and wall heating/cooling, and ceiling heating. Furthermore, the heating pipe is KOMO and SKZ approved and oxygen-tight according to DIN 4726.

Construction of the 20mm x 2mm PE-RT heating pipe

• Level 1 PE-RT – Type 1
• Layer 2 Inner adhesive layer
• Layer 3 Diffusion-tight EVOH layer
• Layer 4 Outer adhesive layer
• Level 5 PE-RT – Type 1

Maximum tube length

This 20mm MAGNUM PE-RT pipe has a diameter of 20mm and a wall thickness of 2mm. We can supply it in rolls of 500 meters. Please note that the maximum pipe length per heating circuit is 150 meters. Longer pipe lengths result in excessive pressure loss. We recommend a maximum pipe length of 100 meters.

Mounting systems

This 20mm MAGNUM PE-RT tube can be used for various mounting systems.

Tacker plate system

The tacker plate system is ideal for large areas of underfloor heating. The pipe can be attached to the tacker plate using tacker staples and a tacker stapler . Use approximately 3 staples per linear meter to prevent shifting.

Shrink nets

You can also use shrink mesh . Heating pipes can be easily secured to the shrink mesh with tie wraps or quick-release fasteners . After installing the shrink mesh with underfloor heating, finish the floor with a (cement) screed. This method is most commonly used in new construction or renovations.

Stud plates

Studded panels are specially designed to simplify the installation of underfloor heating pipes. Using studded panels reduces installation time. The pipes can be easily pressed/clamped between the studs. The panels are fitted with 11 or 30 millimeters of EPS insulation on the underside. This installation method combines simple mounting with underfloor insulation. If the subfloor is already insulated, studded panels can be used without the EPS insulation layer.

Warranty

We offer a full 50-year manufacturer's warranty on this 20mm MAGNUM PE-RT pipe, including coverage for the first 10 years against consequential damage.